Introducing the newest addition in the Wanhao Duplicator 4 family, the brand new Wanhao Duplicator 4S! This dual extruder 3D printer is the latest update in the Duplicator 4 series. The good-value Wanhao 4S is really a wonderful device with an enclosed building chamber. It comes with all the benefits of Duplicator 4x. 3D print ABS without warping! Furthermore, you can build with support filament.
The main product features:
- Very solid metal construction
- Good-value manufacturing machine
- Dual extruder allows support material
- Closed construction building environment minimizes warping
- 2 Free spools in the box
- SimpliFy3D Compatible
- Do not expect a plug and play 3D printer
- Very good-value for money
- Software training intensive
For you, it comes in a black steel exoframe, which makes it very stable and vibration safe. A heated build plate and a fully enclosed build area are characteristics of this good-value 3D printer. These features ensure accurate 3D prints and a stable temperature. 3D print with low warping and shrinking. The Duplicator 4S is equipped with the new MK10 Dual-Extruder set for dual manufacturing.
Use two different colors or one of the extruders with HIPS or PVA as support material. Other features include upgraded electronics and 1/16 micro-stepping motor control. If you want to unlock the full potential of the 3D printer we recommend that you buy SIMPLIFY 3D with this 3D printer. If you don’t want spend money ReplicatorG software is included.
The Duplicator 4S has our latest dedicated 1.75 mm filament extruder. This extruder was designed from scratch. It contains several custom manufactured parts. “We’ve learned a lot over our past extruder designs and incorporated a lot of those lessons here: that’s why it’s smaller, lighter, and faster to build”, says Wanhao.
Since its extruder is designed from the ground up for 1.75 mm filament. It’s light-years ahead of past designs in small-filament reliability. Realize a much better layer alignment which results in nicer 3D prints and higher resolution, 100 microns. We’ve completely overhauled the drive system to give the optimum positioning accuracy. The entire system has been upgraded to sturdy 3/8″ diameter linear shafting. This is probably overkill, but you can trust that the axes will be sturdy.
We’ve also switched to self-aligning, sintered stainless steel bearings. These are very forgiving to DIY assembly and provide a nice, smooth motion on the steel shafts. We’ve completely replaced the Z axis with a stepper driver, cantilevered stage. Guided by two of the linear shafts, this eliminates any Z wobble and results in nicely aligned layers. Using a high-angle lead screw, we were able to increase the speed of the Z axis from 150mm/minute to 1,000mm/minute. This means the layer changes are almost completely imperceptible.
Connect the Wanhao 4S over USB and hit print button – the machine will calibrate itself and start 3D printing. The new electronics have been designed to make the process experience easier than ever. The Duplicator 4S connects to your computer via a standard USB cable thanks to a USB chip on the motherboard. We’ve also added full end stop support so that you never need to touch the XYZ axes ever again. When you hit print, the machine will automatically home itself, heat up, and begin 3D printing. All you must do is sit back and relax while your Duplicator 4s does all the work for you. Living in the future is awesome. Oh yeah, and the electronics are all inside, so you don’t have wires dangling anywhere.
Or you can 3D print with SD card. Sometimes customer failed in manufacturing with computer USB link, due to the computer sleep or shut down automatically. For this reason, we developed SD card reader on a 3D printer. Awesome, all your production job can be executed from this small card. A 2 Gb card is sufficient for any 3D file and keep as a lot of data as you like. Simple and fast is our mission.
- Extruder: New MK10 Dual-Extruders
- Filament Size: 1.75mm Dedicated
- Layer Capability: 0.1mm – 0.5mm
- Build Envelope: 225mm x 145mm x 150mm
- Filament Capabilities: ABS, PLA, PVA, NYLON, HIPS and other common filaments.
- Software: ReplicatorG (Opensource)
- Warranty: 1 Year Limited Warranty
- Frame Color: Black Steel Exoframe
- Heated build plate
|Print Technology||FFF Fused Filament Fabrication|
|Interface||Print with SD Card or direct via USB Port|
|Max Printing Object Size/
|225 * 145 * 150mm, about 5 l|
|Layer Resolution||0.1mm -0.5mm (100 micron)|
|Nozzle Diameter||0.4 mm|
|Positioning Precision||Z-Axis 2.5 micron, XY Axis 11 micron|
|LCD display||4×20 LCD character display and multi-direction control pad|
|Printing Object Specification|
|Layer thickness||0.1mm -0.5mm (100 micron)|
|Extrusion temperature||Recommended Maximum 230 C|
|Platform temperature||Heated Build Platform 120 C Maximum|
|Temperature Sensor||Thermocouple temperature sensors|
|Vertical Printing Speed||15 Cubic Centi-Meter/ Hour|
|Replicator G||Linux, OSX and Windows|
|Inpus Filte Type||STL and G-Cod|
|(other compatible software like Makerware also works)|
|Material Type||Prints ABS, PLA, PET, Nylon, Laywoo-D3, LayBrick, BendLay|
|Color||Wanhao PLA & ABS over 43 colors to choose from|
|Filament size||1.75+-0.1mm Wire|
|Chassi||Black Steel Exo-frame, very stable and durable|
|Build platform||Heated build plate made of aluminum|
|Stepper Motors||1.8° step angle with 1/16 micro-stepping|
|XYZ Bearings||Wear-resistant, oil-infused bronze|
|Connectivity||USB, SD Card slot|
|Printer Dimension||320 x 466 x 382 mm|
|Printer Weight||12 KG|
|Electric Power Supply||220V / 110V ( Universal power supply, take IEC cable)|
|12 Months warranty –
(Normal wearing and consumables not covered).
We will provide parts or service on items that
proved to be defective. Pls also see our options
with extended warranty and support.
If you want a good-value dual extruder 3D printer with closed building chamber, the Wanhao Duplicator 4S is your first choice.