Monocure 3D Rapid Resin – White

Description

Monocure 3D Rapid Resin has outstanding performance for DLP 3D printing.  For more information on Monocure 3D printing resin, go to the Monocure website here.

Monocure 3D RAPID photo-reactive resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm.

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

Monocure resins have been tested with a ‘Shore D Hardness Durometer’ and have a rating of 70. (A hard hat has a rating of 80)

The Viscosity of our resin is 500 – 600cps @ 25°C (Brookfield RVT).

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight.

PRINTER COMPATIBILITY FOR MONOCURE RAPID RESIN

The Monocure RAPID resin product range is designed for low powered LED DLP type 3D printers such as those listed below.

Because the RAPID resin is designed to cure very easily, it may not be best suited to UV resin printers that have a UV light stronger than 50 watts as it could lead to over-cured parts..

Monocure RAPID resin is suitable for printers such as the following;

• Wanhao Duplicator 7
• Anycubic Photon
• XAYAV Model V
• FLSUN S
• Micromake L2

TECHNICAL DETAILS

The Monocure RAPID 3D resins have been specifically designed for low powered LED UV DLP type printers such as the Wanhao Duplicator 7. This resin has a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

The Monocure RAPID resins have been tested with a ‘Shore D Hardness Durometer’ and have a rating of 70. (A hard hat has a rating of 80)

The Viscosity of the Monocure RAPID resin is 500 – 600cps @ 25°C (Brookfield RVT).

Monocure UV resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

RECOMMENDED RESIN STORAGE

Please store Monocure 3D RAPID resin in a dark, cool place out of direct sunlight.

TECHNICAL & SAFETY DATA SHEETS

• Technical Datasheet for Monocure RAPID Resin – White
• Safety Datasheet for Monocure RAPID Resins – Pigmented

If you have any questions, please feel free to get in touch.  Here at L3D, we’re very happy to help you get the right resin for your printer and application.

Happy 3D printing 🙂