Description
MakerJuice SF 3D printing resin – a bit bendy!
SF resin from Makerjuice provides slightly more bend than their standard resin, while still maintaining fast print speeds and precision accuracy. SF is ideal for printing any part that needs to be hard while not being brittle, SF is perfect for things like snap-fit parts.
SF has a high pigment concentration which produces bright and opaque printed parts, due to the higher viscosity the pigment does not settle out as fast.
SF, like all of our resins, cures under UV A, B, and C light up to around 420nm. You can cure it with a DLP projector, a UV laser, or UV leds. When using UV lasers or LEDs, the cure time is extremely fast, so you don’t need much power.
This resin is low odor and contains zero VOC.
The resin is available in a number of colours as shown below.
MakerJuice Resin – 3D Printer Compatibility & Settings
MakerJuice Standard resin cures under UV A, B, and C light up to 420nm.
It can be cured with a DLP projector, a UV laser, or UV leds. When using UV lasers or LEDs, the cure time is extremely fast, so you don’t need much power.
What others are saying
There are no contributions yet.